-
-
What kind of steel is used for the cylinder?

About Us

All categories

What kind of steel is used for the cylinder?

  • Categories:News Center
  • Author:
  • Origin:
  • Time of issue:2022-03-03 11:57
  • Views:

(Summary description)The oil cylinder mainly includes a cylinder barrel, a piston rod, a cylinder head, and a piston. Cylinder head castings for low pressure, HT300 gray iron for medium and low pressure, 35, 45 steel for medium and high pressure. When the cylinder head itself is the guide sleeve of the piston rod, the cylinder head is preferably made of cast iron. At the same time, brass, bronze or other wear-resistant material should be fused on the guide surface… The oil cylinder mainly includes a cylinder barrel, a piston rod, a cylinder head, and a piston. cylinder head Castings for low pressure, HT300 gray iron for medium and low pressure, 35 and 45 steel for medium and high pressure. When the cylinder head itself is the guide sleeve of the piston rod, the cylinder head is preferably made of cast iron. At the same time, brass, bronze or other wear-resistant material should be fused on the guide surface. In the case of a construction in which the guide sleeve is pressed into the cylinder head, the guide sleeve should be wear-resistant cast iron, bronze or brass. piston Commonly used materials are wear-resistant cast iron, gray cast iron (HT300, HT350), steel and aluminum alloys. The concentricity tolerance value of the piston and piston rod shall be 0.03mm.

What kind of steel is used for the cylinder?

(Summary description)The oil cylinder mainly includes a cylinder barrel, a piston rod, a cylinder head, and a piston. Cylinder head castings for low pressure, HT300 gray iron for medium and low pressure, 35, 45 steel for medium and high pressure. When the cylinder head itself is the guide sleeve of the piston rod, the cylinder head is preferably made of cast iron. At the same time, brass, bronze or other wear-resistant material should be fused on the guide surface…

The oil cylinder mainly includes a cylinder barrel, a piston rod, a cylinder head, and a piston.

cylinder head

Castings for low pressure, HT300 gray iron for medium and low pressure, 35 and 45 steel for medium and high pressure.

When the cylinder head itself is the guide sleeve of the piston rod, the cylinder head is preferably made of cast iron. At the same time, brass, bronze or other wear-resistant material should be fused on the guide surface. In the case of a construction in which the guide sleeve is pressed into the cylinder head, the guide sleeve should be wear-resistant cast iron, bronze or brass.

piston

Commonly used materials are wear-resistant cast iron, gray cast iron (HT300, HT350), steel and aluminum alloys.

The concentricity tolerance value of the piston and piston rod shall be 0.03mm.

  • Categories:News Center
  • Author:
  • Origin:
  • Time of issue:2022-03-03 11:57
  • Views:
Information

The oil cylinder mainly includes a cylinder barrel, a piston rod, a cylinder head, and a piston. Cylinder head castings for low pressure, HT300 gray iron for medium and low pressure, 35, 45 steel for medium and high pressure. When the cylinder head itself is the guide sleeve of the piston rod, the cylinder head is preferably made of cast iron. At the same time, brass, bronze or other wear-resistant material should be fused on the guide surface…

The oil cylinder mainly includes a cylinder barrel, a piston rod, a cylinder head, and a piston.

cylinder head

Castings for low pressure, HT300 gray iron for medium and low pressure, 35 and 45 steel for medium and high pressure.

When the cylinder head itself is the guide sleeve of the piston rod, the cylinder head is preferably made of cast iron. At the same time, brass, bronze or other wear-resistant material should be fused on the guide surface. In the case of a construction in which the guide sleeve is pressed into the cylinder head, the guide sleeve should be wear-resistant cast iron, bronze or brass.

piston

Commonly used materials are wear-resistant cast iron, gray cast iron (HT300, HT350), steel and aluminum alloys.

The concentricity tolerance value of the piston and piston rod shall be 0.03mm.

Scan the QR code to read on your phone

Related News

About Hydraulic Cylinders

About Hydraulic Cylinders

As we know, hydraulic cylinders, also defined as linear motors, is a mechanical device that converts the hydraulic energy of a fluid to mechanical energy. Almost all hydraulic systems ultimately drive a hydraulic cylinder. No matter how accurately the selection of hydraulic unit equipment is made, we get to see them in action only with hydraulic cylinders. Hydraulic cylinders designed and produced without considering certain principles may not perform as desired. This can affect the entire hydraulic system and result in huge financial losses. This writing will address the most common problems that occur during the design and production stages of hydraulic cylinders, explain the issues caused by these problems and point out the solutions and things to take into account.
2023-03-09
Welcomt to Jiangsu YINGNAISI Machinery Manufacturing Co., Ltd. !

Welcomt to Jiangsu YINGNAISI Machinery Manufacturing Co., Ltd. !

Jiangsu YINGNAISI Machine Manufacturing Co., Ltd. (JIANGSU YINGNAISI) was located in Wujin District,Changzhou City,Jiangsu Province,China.Where is nearby Shanghai City(one hour by high-speed train). Our factory was founded in 2005,with covering an area of more than 23000 Square meters,and more than 100 employees.Cold drawn and cold rolled precision seamless steel pipes and Hydraulic cylinder are our main products. We have a complete range of equipment and sophisticated technology. We are equipped with two highly-precision cold-drawing hydraulic presses (250T and 300T respectively), a 180 finishing mill group, many CNC boring and rolling presses, multi-roll straightening machines, CNC lathes and dozens of large honing units, with an annual output of 15,000-plus tons of precision cold drawn tubes.  Our products are extensively applied in hydraulic pressure of engineering machinery, pneumatic linear actuators, petroleum oil-well pump cylinders, micro-motor shell, lubricating oil ball sweep systems, aluminum foil mandrel, high pressure gas cylinders, automotive shaft, textile, printing and dyeing, glass packaging, transmission roller and other areas. Our quality is ensured and we were certified to ISO 9001 Certificate and got "Jiangsu quality credit AAA grade brand enterprise" title.
2022-03-03

Contact Information

Panjia Industrial Concentration District, Wujin District, Changzhou, Jiangsu

mary@cnhengjiu.com

+86-18961135521

+86-519-86549398

redsunfood1

Follow Us

微信二维码
Online Message

Copyright © 2022 Jiangsu YINGNAISI Machinery Manufacturing Co., Ltd. All rights reserved     苏ICP备12047497号-1   Powered by: www.300.cn